Analysis of the reasons for low output of mobile crushers

The mobile crusher is a new type of mobile crushing equipment that plays an important role in the entire production process. This equipment integrates crushing and screening. The entire process runs smoothly, is safe and reliable, and can be combined with a variety of equipment to meet different material needs. It is widely used in metallurgy, construction, chemical industry, railway, water conservancy and other industries that often require relocation operations. However, during the production process, the output of the mobile crusher may not be high. What is the reason for this?
 

1. Different broken materials

The physical properties of different materials are quite different, such as hardness, humidity, viscosity, etc., which will affect the output of the mobile crusher. With different properties, they will show different crushing and sand production amounts.

2. Differences in material viscosity

The viscosity of the material will affect the production output of the mobile crusher. The greater the viscosity, the easier it is to adhere to the cavity of the equipment. If it is not cleaned in time, it will affect the working efficiency of the mobile crusher. Therefore, when selecting materials, pay attention to the viscosity of the material. , cannot exceed the endurance range of the equipment.

3. Differences in material composition

The fine powder contained in the material is also a key point that affects the output of the mobile crusher. A high content of fine powder will easily adhere to the cavity of the mobile crusher, affecting the production of the mobile crusher. Therefore, materials with too much fine powder content should be processed before production. Screening to avoid affecting the production output of the mobile crusher.

4. Differences in material humidity

If the moisture content of the material is too high, it is easy to adhere to the crushing cavity during crushing, and it is also easy to cause blockage, resulting in a decrease in the production capacity of the mobile crusher. To solve this problem, the humidity of the material should be controlled when selecting materials. Sunlight or air drying can be used to reduce the moisture content of the material. The moisture content of the material.

5. The fineness of finished sand is different

If the fineness of the finished sand and gravel is required to be higher, the production capacity of the mobile crusher will be smaller. If the user has no special requirements, the fineness of the mobile crusher can be adjusted to medium fine, and production can be made according to actual needs.