What should I do if the cone crusher discharges the ore evenly but the output is not high?

1. Optimize feeding: Ensure that the size of the feeding material is suitable for the model of the crusher to prevent materials that are too large or too small from entering the crushing cavity, which can improve the crushing efficiency. At the same time, control the humidity of the material. Excessive humidity may cause material to stick and reduce equipment output. Therefore, if the material humidity is high, it should be dried before crushing.

cone crusher

2. Adjust the performance of the crushing chamber: The crushing chamber is the main crushing area of the cone crusher, and its performance directly affects the output. By improving the structure of the crushing chamber to make it more conducive to the laminated crushing of materials, the output of the equipment can be significantly increased.

3. Improve crushing capacity: The crushing capacity of the cone crusher mainly depends on the spring pressure. If the spring pressure is insufficient, the crushing capacity will be affected. Therefore, the crushing capacity can be increased by checking and adjusting the spring pressure, or increasing the oil supply pressure of the hydraulic station.

4. Adjust the size of the closed-edge discharge port: The output of the equipment can be achieved by adjusting the size of the closed-edge discharge port. When the size of the closed-side discharge opening increases, the output of the cone crusher will increase accordingly, but please note that this may result in a decrease in the quality of the finished product. Therefore, appropriate adjustments should be made according to actual needs.

5. Keep the machine running with a full cavity: During the crushing process, try to keep the machine running with a full cavity, that is, feed materials continuously and evenly to avoid feeding too much or too little, so as to ensure the normal operation of the crusher.

Improving the output of the cone crusher requires comprehensive adjustments and optimization from multiple aspects. In actual operation, corresponding measures can be taken according to the specific situation to improve the crushing efficiency and output of the equipment. At the same time, regular equipment maintenance and inspection are also important links to ensure the normal operation of the equipment.