How to solve the problem of high temperature of cone crusher in summer

1. Install cooling device: Install cooling devices such as fans and radiators on the equipment to discharge the heat generated in the crusher body in time and maintain the normal operating temperature of the equipment. This can not only prevent the equipment from overheating, but also extend the service life of the equipment.

cone crusher

2. Clean the cooling system: After the cone crusher is used for a long time, the cooling devices such as radiators and fans may be covered with dust or debris, resulting in poor heat dissipation effect. Therefore, regular cleaning of the cooling system and maintaining its cleanliness can effectively solve the high temperature problem.

3. Reduce the motor load: Excessive motor load can also cause high temperature problems. By adjusting the feed amount of the crusher, controlling the particle size of the discharge material, etc., the motor load can be reduced, thereby reducing the heat generated by the equipment.

4. Use suitable lubricating oil: High temperature in summer can easily make the lubricating oil thinner, thereby reducing the lubrication effect, increasing the friction between the various parts of the equipment, and accelerating the wear of the equipment and the accumulation of temperature. Therefore, in summer, high-quality lubricating oil with high viscosity and low melting point should be selected, and the lubricating effect of the lubricating oil should be checked regularly and replaced in time.

5. Maintain the uniformity of the cone crusher feeding: Excessive or uneven feeding will increase the load of the cone crusher, resulting in high temperature. Therefore, the uniformity of the cone crusher feeding should be ensured to avoid excessive feeding.

6. Do a good job of dust prevention: Regularly check the fixing bolts of the dustproof seal slip ring of the cone crusher to prevent the dustproof seal and slip ring from falling off, so that a large amount of dust and ore sand enter the body, affecting the normal operation and heat dissipation effect of the equipment.

7. Regular inspection and maintenance: Regularly inspect and maintain the cone crusher, such as checking the operating clearance between the main shaft and the main shaft bushing, the blockage of the oil pipe or oil groove, etc., to find and solve the problem in time to prevent the occurrence of high temperature problems.