How to ensure the correct feeding of hydraulic cone crusher?

Hydraulic cone crusher is a popular crushing equipment among mining stone crushing equipment. It is widely used in building materials, mining and other industries to meet the different production requirements of users. The feeding of equipment during production is more important. Correct feeding can ensure that there will be no blockage during the operation of the equipment and improve production efficiency. So how should the feeding of hydraulic cone crusher be carried out correctly?
 

Hydraulic cone crusher

1. Install a feeder with appropriate structure on the top of the hydraulic cone crusher, and the feeding amount of the feeder must match the crushing efficiency of the equipment to ensure that the material supply is evenly balanced to ensure the improvement of the production capacity of the equipment.

2. Before the materials to be crushed are put into use, they need to be screened first to screen out the fine materials, miscellaneous materials, and sticky materials mixed in the materials, reduce the blockage of the discharge port and the excessive compression of the spring, and avoid the hydraulic cone crusher from overloading and affecting the production efficiency. In addition, an iron removal device can be installed to pick out the foreign matter or iron blocks that cannot be crushed in the materials to prevent them from entering the internal parts of the equipment and damaging them.

3. The feeding method must meet the requirements. The materials must be evenly dispersed in the hydraulic cone crusher. The speed and falling height of the materials when they are fed into the crushing chamber will affect the production efficiency. Therefore, a reasonable and high-yield production method should be formulated to improve the production efficiency. The equipment is required to fill the crushing chamber with materials during production. In this case, the feeding can ensure the improvement of the production capacity of the equipment and the uniform particle size of the products. If the equipment stops, the feeding needs to be stopped, and the residual materials in the crushing chamber of the equipment need to be cleaned.