What should I do if the sand making equipment is stuck?

The jamming of sand making equipment mainly refers to the phenomenon that the equipment suddenly gets stuck and cannot operate. In this case, the material cannot be crushed, which will not only affect the production efficiency, but also seriously reduce the service life of the sand making equipment. Therefore, it is necessary to Find the cause and deal with it in time. Here we will analyze the causes and solutions for the jamming of sand making equipment:
 

There are two main reasons for the jamming of sand making production line equipment. One is that the equipment is jammed due to material blockage, and the other is that the main shaft is broken and jammed. The causes of these two situations are different. The causes and solutions are introduced below. method.

sand making equipment

1. Machine jam caused by material blocking

The main reason for material blocking is unreasonable feeding, which may be due to unreasonable size, hardness, viscosity and humidity of the material, or the feeding speed exceeds the processing capacity of the sand making equipment, or there may be Unbreakable debris enters the crushing cavity, causing the material to become stuck.

To solve the problem of jamming of sand making equipment caused by blockage, we need to confirm that the materials entering the crushing cavity do not contain foreign matter; when feeding materials, they must be fed in strict accordance with the needs of the equipment, and the feeding speed must be based on the processing of the sand making equipment. Capacity depends on the equipment, and it should not be too fast or too slow, so as to ensure the smooth operation of the sand making production line.

2. Machine jam caused by broken spindle

The main cause of spindle breakage and machine jamming is improper use during operation or overloading of the equipment.

To solve the jamming of sand making equipment caused by the breakage of the main shaft, in the actual production process, the sand making equipment must be operated strictly according to the usage methods specified in the instructions and the rated working load should be used for production. Do not overload production, so as to avoid production interruption. The main shaft of sand making equipment is broken.