ＷhatsApp
Wechat
Leave Message
Chat Online
1. Uniform feeding
The feeding speed should be uniform. Too fast may cause material blockage and equipment damage, while too slow will cause untimely feeding and gaps, which will also reduce the efficiency of cone crusher. Therefore, uniform feeding is required.
2. Choose a good crushing chamber
The crushing chamber of cone crusher determines the degree of crushing and particle size of the material. Changing the shape of crushing chamber can change the force angle of the material during the crushing process, and it is also related to the number of times the material is crushed in the crushing chamber, which has a great impact on the efficiency and performance of the crusher. Therefore, when purchasing, you should choose the crushing chamber shape that meets the needs.
3. Maintain appropriate speed
The motor is the power source of electric cone crusher, and it also affects the speed of the equipment. If the motor power is high, the speed will be higher and the productivity will be greater. The amount of crushed materials will increase accordingly, which can make the particle size of the crushed materials finer. But it cannot be too fast, which will damage the equipment, so the speed should be increased appropriately.
4. Iron protection
Under normal production conditions, good iron protection can protect the equipment from damage when the material is not easy to break or overloaded, reduce the failure rate, and ensure higher production efficiency of the equipment.
5. The feed should meet the equipment requirements
The hardness, humidity and size of the material entering the cone crusher should meet the requirements of the equipment. If the hardness and humidity of the material are relatively large, the compressive strength and difficulty will also increase, and the efficiency will also decrease. Therefore, the crushed material should meet the requirements of the cone crusher to improve production efficiency. It is said that the efficiency of the cone crusher is relatively high, but in actual production, with the different properties of the material and the length of time the equipment is used, its efficiency will be affected to a certain extent and decrease.
